Garage out of space. Need ideas.

[Doctor_Ink]

Originally Posted by Spencyg

A 17 year old building a bar. Hmmm. That's for soda, right?

Yessir, I don't drink much. As for the other suggestions I will definitely be looking into storage units thanks guys! Do you know approximately how much it costs to rent them?

[bad_idea]

I rented my 10x30 for $120 a month. It was a little out of the way but the place down the street from the house wanted $250 a month! Prices vary greatly from one place to another. Definitely call around.

[Doctor_Ink]

Originally Posted by bad_idea

I rented my 10x30 for $120 a month. It was a little out of the way but the place down the street from the house wanted $250 a month! Prices vary greatly from one place to another. Definitely call around.

Okay thanks

[wxm]

I am off topic now. But seriously, at 17 year old, aren't you supposed to invest your time and money in school/college rather than shop/bar? The shop/bar will come naturally once you take care of your 'investment'?

[Doctor_Ink]

Originally Posted by wxm

I am off topic now. But seriously, at 17 year old, aren't you supposed to invest your time and money in school/college rather than shop/bar? The shop/bar will come naturally once you take care of your 'investment'?

I'm not into the whole school thing... I take school online and work full time. Don't try to tell me I should be doing something else.

[GirlnAgarage]

Originally Posted by Doctor_Ink

I'm not into the whole school thing...

Who is?

Get the certs or degrees you might need though. There's a thread recently where a guy can't get into the job he wants because he doesn't have the tick in the box the hiring manager wants to see. He does have a lot of work experience though.

At the very least come out with an Associate's in something.

[Doctor_Ink]

Originally Posted by GirlnAgarage

Who is?

Get the certs or degrees you might need though. There's a thread recently where a guy can't get into the job he wants because he doesn't have the tick in the box the hiring manager wants to see. He does have a lot of work experience though.

At the very least come out with an Associate's in something.

Technical College is where I'm headed.

[GirlnAgarage]

Originally Posted by Doctor_Ink

Technical College is where I'm headed.

Right on

[ket-tek]

Originally Posted by Doctor_Ink

I don't make enough money to buy a house at 18. I'm a Maintenance Technician at an Elderly Living community.

Well your in a prime position to make some new friends that may leave you some money or a house with a garage in the next few years..

Yeah, yeah. I know it f*d up to say. Ok, I'm a peice of sh*t..

Originally Posted by BackTracker

I'm only slightly ashamed to admit that at one point i used a storage unit as a makeshift woodshop....and interestingly, no one seemed to notice or care.

Nothing to be ashamed about???

Originally Posted by rsieracki

i was going to suggest renting a small vacant factory/garage something...

lol... i had a 12x22 i rented for a few years 110 a month where i parked and "worked" on my 76 eldo convertible with my buddy...

There are tons of old factorys and industrial buildings around my city, and I checked into it one time. I found the owners wanted ridiculous money to rent them, like 8k a month. Seemed they would rather let it sit condemned than only make a $1-2k/mo for some reason.

Originally Posted by Doctor_Ink

Yessir, I don't drink much. As for the other suggestions I will definitely be looking into storage units thanks guys! Do you know approximately how much it costs to rent them?

I had a 10x20 for 8 months to keep my project truck in while I was building the new house. It was $110/mo, but they gave it to me at $85/mo to prepay the 8 months up front. It was kinda tight but I did work on it a little in there, only way to get power was through a srew in lightbulb adapter, that's the biggest problem I had there. This was a typical ministorage row place.

A friend of mine had a 20x30x16 in a more industrialized storage shed area, it was $300/mo but it had it's own 100amp breaker panel with some 120v and 240v outlets mounted under it. Still just a corrugated steal row shed, no insulation, etc.. Basically an oversized minished but it had a man door and a 12x10 roll up..If I had no garage this is where I would go, there were a bunch of mid-20's guys renting these to build their cars or bagging thier minitrucks in, as the power was there to have a big compressor and a welder.

[PCO6]

You're on the right track Doctor_Ink. At least you're thinking about these things and starting to plan for them. I wasn't much older than you when I started building and racing off road cars. I hooked up with 3 other guys and found a big garage on a farm that suited our needs. It was perfect - even had a sub shop and beer store at the end of the drive way. About 5 years later I got in with another group in a big industrial building. About 15 guys stored their cars while another 5 of us worked on ours. It was a great set up and really allowed me to get established in my racing and restoration hobbies.

I made some good friends in my search for space when I was young. Good luck.

[machine_punk]

I've lived places where I have only had a 4ft by 8ft place to work. It was on the ground floor, next to a 2-car carport. I stored everything inside, then pulled it all onto the carport to work, then put it all back when done. I have a two-car garage and I still occassionally set up the table saw on the back patio to cut larger pieces of wood.

Build yourself a small, sturdy workbench with wheels. Make it narrow enough to easily get through any door (28") and short enough to move easily. Here is how I took care of the mobility problem with mine. The wheels are only on one end, so you can lift the other end of the bench and move it like a wheelbarrow...






Here, you see the top of the bench (on the left) that I built many years ago to fit in that 4'x8' storage area...


If you have friends you trust, you could go in together on renting a small house. Even if it doesn't have a garage, you could likely get the owner to let you keep a 10'x12' shed in the back.

As long as you are not actually using saws, you can set up a room in an apartment or a house to work in. Cut your parts outside on the patio and take them inside to clamp and assemble. Painting and finishing can be done on a back patio or an apartment deck.

Whatever you choose won't necessarily be easy, but in the end, it will be worth it. There is nothing like being able to look at something and say, "I built that." You basically have to start thinking, "How can I make this work?"

Good luck.

M_P