WTB: 40's Vintage Vlchek, Walden, Other

[Private Lugnutz]

*** LAST UPDATED April 30, 2013 ***

STILL looking for following 40's vintage tools:

Androck
- No. 3 cross-recess (Phillips) head screwdriver, 6 inch blade (ferrule to tip)

Utica
- 8 inch Adjustable wrench, from 1941-1945 period, marked specifically like this...
"8 In. ) <U><TI><CA> ( MADE IN U.S.A." on a panel in the recessed handle, and like this...
"8 In. ) UTICA ( ALLOY STEEL" on a panel on the flip side.
if there is no panel in the recessed handle, it's post-war and I can't use it, thanks

Vlchek
- No. 2 cross-recess (Phillips) point screwdriver, black handle, "Flying V" logo on ferrule, 4 inch blade

Walden
- 3150 1/4 migit ratchet, black oxide finish
- 3116 1/4 migit tommy bar (sliding tee), black oxide finish
I only need these items from the set, but will consider whole sets if someone doesn't want to break a set up
I have these in natural steel finish and don't need dupes, thanks

Other - Misc - ANY BRAND, but must be branded/marked
- Brass drift, 7" x 1", slightly chamfered on each end
- Brass drift, 10" x 3/4", no chamfer
- Oval sash brush, No. 5, 12"-14" handle length
- Screwdriver, alloy steel, double-end, double-offset, 8-1/2" x 3/8"
- Chisels (7" x 1/4" cape; 6" x 1/2" cold; 8" x 3/4" cold; 6" x 3/8" diamond-point)
- Punches/Drive-Pins (4" x 1/8"; 4" x 1/4"; 4" by 3/8")

THANKS FOR READING

[bofum]

I don't quite have what you're looking for, but if you are into VLCHEK, i do have a few wrenches that might interest you.

double open W1820 5/8 x 9/16
Combos
WBE16 - 1/2
WBE20 - 5/8
WBE22 - 11/16
WBE26 - 13/16
WBE28 - 7/8

[Private Lugnutz]

Thanks for your interest and offer, bofum. Unfortunately, I don't need any of those. If it was a few weeks ago I would've bought the W1820 from you, but I just landed an Alloy and a Chrome-Moly. Good to know there are other Vlchek guys here; I am sure we will do some horsetrading or something in the future.

[Dale B]

I've got a bunch of duplicates , I'll look and see what I have ....

[Private Lugnutz]

Thanks, Dale. 'Preciate it.

[crankshaftdan II]

Pictures attached of Vlcek tools

[Private Lugnutz]

Dan,

I can't quite make out the sizes on the 2 short dbl hex dbl end box wrenches or the second to bottom open end wrench. Those are the only ones that look as if they might meet my WB2024 or W1416/725 needs.

Also, what size is the punch and how is it marked? I might be interested in that too.

THANKS

[T56 Impala]

I'v got a W 1820, 1922 and 2426. Best I can figure from my research they are all 1930's production. The 2426 being 1934. The others are '37 or '38. Always open to trades.

[SCscoutguy]

I don't know if you need one of these but I have a really nice little Walden 3117 1/4" breaker bar if you are interested.

[Private Lugnutz]

That is a black beauty. I have a slightly later model. Different flex head construction.





It's this set that I need the tommy bar (sliding tee) and ratchet to complete, in the same black oxide finish. (I own each in polished steel finish.)

Thanks for checking in.

[Private Lugnutz]

deleted out of date information

[rmsg0040]

I have a 6" if interested

http://www.garagejournal.com/forum/s...d.php?t=149490

[Private Lugnutz]

Updated, bumped

[Private Lugnutz]

Updated

[Private Lugnutz]

Updated.

[Private Lugnutz]

Updated.