Craftsman Machinist Tool Box Upper and Lower - $200 (tools not incl.)
http://sfbay.craigslist.org/eby/tls/3369142105.html
http://sfbay.craigslist.org/eby/tls/3369142105.html
Oh brother
- Thread starter larryq
- Start date
Jim Johnstone
Well-known member
Thats pretty standard prices for Kennedy machinist boxes around here. I'm always stunned by how cheaply you Americans manage to find Machinist boxes.
Jim Johnstone
Well-known member
Where are these flea markets located? Seriously I have been trying to buy a decent machinist box since I started my apprenticeship and can't find **** for less than a few hundred dollars.
Mickey O
Well-known member
Just saw that almost same set, middle box was a Waterloo, top box was a Craftsman, it was $65:
You have to be in the state. I turn down 2 more Kennedy top boxes becuase I thought four were plenty.
Jarhead0408
Well-known member
Nobody's going to believe me without pics, but I picked up a Kennedy upper like the OP posted for $0.25 a few years back. To be honest though, it looked like it was worth $0.25 though. Drawers still work fine though and no rust so it's good to me!
justanengineer
Well-known member
I believe you. Ive bought several for <$25 with tools and always felt lucky if I got $20 for the boxes. The top box is a model 820 Kennedy IIRC, and dam are those things tinny.
Jarhead0408
Well-known member
I didn't even know it was a Kennedy until a few years after the fact when I got onto the GJ.
Flatintoone
Well-known member
Around here, they show up on CL all the time for $75-200. I've bought two 27" 8-drawer chests without tools (one Craftsman, one Kennedy-see the garage sale thread) in the past year for a good chunk less than that. Being patient but not aggressive, I guess.
Mickey O
Well-known member
I'm not sure I believe you, I would need to see some pictures of the said tool box as well as the quarter (or the 2 dimes & 1 nickel, or 5 nickels, or 1 dime & 3 nickels, or 25 pennies, or 2 dimes & 5 pennies, or 10 pennies & 1 nickel & 1 dime, or 15 pennies & 2 nickels, or 20 pennies & 1 nickel, etc.) be handed to the seller.
mmack66
Well-known member
thundermug
Well-known member
I got a Kennedy box #526 for $15 about a year ago. Cheap happens.
odelay01
Well-known member
I recently found a Kennedy machinist box for 10 buck at a yard sale. It's posted in the garage sale thread. But I have seen plenty of junk ones that were way over priced.
Just need to be there first... Upper (Beach) was under $100 and that lower was $15, but had to put some wheels back on. Have had good luck finding boxes, in fact found some vintage Gray right down the street from you.
That Beach upper version comes up regularly.
Stuart in MN
Well-known member
The prices in the original post are too high, but the problem with posting it here is you'll get people responding who have to one up each other with the super deals they've found.
Outlander
Well-known member
I'm with Jim Johnstone....you are all posting 'you ****' prices according to us in Canada. I need to get out more.
dirtydogintex
Well-known member
It does get to smelling mighty fishy @ times round here....
Flatintoone
Well-known member
I paid $50 each for mine. One through CL, one at a garage sale. Both are fully functional, one is nicer and less used than the other. I wouldn't have bought the second one at that price, but it's for my dad.
Jim Johnstone
Well-known member
Just for fun, this is the kind of "deal" I find up here.
http://ontario.kijiji.ca/c-buy-and-...Kennedy-Machinist-Tool-Box-W0QQAdIdZ424669006
For those won't view it, its an 8 drawer Kennedy top chest, no tools included, $150.
or
http://ontario.kijiji.ca/c-buy-and-...nnedy-machinist-tool-boxes-W0QQAdIdZ418625988
8 drawer top with middle chest, $200, no tools.
$150 to $200 with no tools for just a top chest is a pretty standard price here.
http://ontario.kijiji.ca/c-buy-and-...Kennedy-Machinist-Tool-Box-W0QQAdIdZ424669006
For those won't view it, its an 8 drawer Kennedy top chest, no tools included, $150.
or
http://ontario.kijiji.ca/c-buy-and-...nnedy-machinist-tool-boxes-W0QQAdIdZ418625988
8 drawer top with middle chest, $200, no tools.
$150 to $200 with no tools for just a top chest is a pretty standard price here.
Last edited:
You should abandon Canada and move to the US.
Jarhead0408
Well-known member
Can't say I blame you Mickey. If someone had told me that I'd call bull too!
But, it did happen. Wish I could post up pics of it but my laptop and GJ don't mesh real well with photo's. Or photobucket for that matter.
Like I said though, It LOOKS like a $0.25 Kennedy if you can imagine that. Beat up and crappy paint job (from me) But it works. Got it from a local Catholic Church's fundraising yard sale.
Packard V8
Well-known member
FWIW, I've got five Kennedy 7-drawer machinist's boxes and one mechanic's chest for which I paid from $20 to $50. The condition was pretty much in line with the price. The wider top and middle machinists boxes came as a package deal with tools, so difficult to say how much.
Bottom line - Kennedy has made millions of them, including some for Craftsman, so they're out there.
jack vines
Bottom line - Kennedy has made millions of them, including some for Craftsman, so they're out there.
jack vines
Then there is this guy. These things have been posted for damn near a year on CL every week. He just recently lowered the price to $1000
http://dayton.craigslist.org/tls/3370313049.html
or this guy who wants $125 for the lil 6 drawer
http://dayton.craigslist.org/tls/3361037359.html
at least he gives a good description copy pasted from MSC's website along with a MSRP of $615
$625 for this set
http://dayton.craigslist.org/tls/3290663013.html
The kennedys are nice boxes when priced accordingly, but some of these guys want top dollar over what a nice larger SO box would go for. Albeit if you need a machinist box, a mechanic box would probably not work as well because of the large deeper drawers
http://dayton.craigslist.org/tls/3370313049.html
or this guy who wants $125 for the lil 6 drawer
http://dayton.craigslist.org/tls/3361037359.html
at least he gives a good description copy pasted from MSC's website along with a MSRP of $615
$625 for this set
http://dayton.craigslist.org/tls/3290663013.html
The kennedys are nice boxes when priced accordingly, but some of these guys want top dollar over what a nice larger SO box would go for. Albeit if you need a machinist box, a mechanic box would probably not work as well because of the large deeper drawers
Attachments
Last edited:
alex71
Well-known member
Thought I did decent 2 weeks ago. 350 for this whole set. I know the one drawer handle is loose. Just need to tighten it back up.
I sold a roller just like that, in very nice shape (no mid box or locker, but it did have the drop shelf) for $400 today. The guy who got it was happy to pay it.
Last edited:
jeffmoss26
Well-known member
Look, now it's listed on GJ classifieds.
http://www.garagejournal.com/forum/showthread.php?t=172664
http://www.garagejournal.com/forum/showthread.php?t=172664
byoungblood
Well-known member
I bought the top box at a yard sale about three weeks ago for $15.
Guy selling those needs to put the crack pipe down.
Guy selling those needs to put the crack pipe down.
jeffmoss26
Well-known member
He apparently can't read the rules either...three separate posts in for sale today!
Last edited:
