To avoid these ads, REGISTER NOW!

Bonney A707 Ratchet

To avoid these ads, REGISTER NOW!

woody 73

Well-known member
Joined
Apr 14, 2009
Messages
11,545
Location
The Great State Up North
If you pull up the web-site Alloy Artifacts look under the Bonney section under sockets & ratchets then you can read the history of your ratchet in question.:)
 

stratman977

Well-known member
Joined
Jan 26, 2012
Messages
633
Location
Belle Vernon, PA
It looks similar to the za707 on page 6 of the bonney page on alloy artifacts.

I have the za707 and it a pretty nice ratchet but mine is a little worn and could use a rebuild kit, it keeps changing direction on its own. It is fine tooth and is really smooth. It would be one of my favorites if it worked properly.
 

VTX1800

Member
Joined
Nov 14, 2010
Messages
24
Location
Near Council Bluffs Iowa
I can't verify that I had that model number but the first socket set I bought was a Bonney and the ratchet was very fine toothed. Over the years I have wondered what ever happened to that ratchet. I bought in in about 1962. Wish I would have kept it around for a wall hanger if nothing else.
 

CecilTheTurtle

Well-known member
Joined
Dec 10, 2011
Messages
107
Location
Boston, MA
I've got the T707 little brother to that ratchet. Biggest issue with them is that back is press fit so there's no way to open the ratchet to replace/clean anything. If it's broke, it's broke for good.
 
To avoid these ads, REGISTER NOW!

woody 73

Well-known member
Joined
Apr 14, 2009
Messages
11,545
Location
The Great State Up North
When some of you are saying fine toothed am I missing something those are old bonney ratchets I thought that fine tooth features did not exist that far back. If they did exist maybe someone could tell me who was the first company to use that on their ratchets.
 

stratman977

Well-known member
Joined
Jan 26, 2012
Messages
633
Location
Belle Vernon, PA
Pattent applied for in 1957. I think its around 80 tooth.

http://www.google.com/patents/US2957377

The za707 1/2 inch and the similar 3/8 that I have both have that top side press fit but the back side has a snap ring where you can disassemble it. Thye must have forseen this as a problem and made the change on the later designs. That cover works like a soft plug so I think you could carefully remove it and straighten the cover and set it again with a punch. This would be a last ditch effort to save it though, I wouldn't take it apart just to see whats inside.
 

adamsredlines

Well-known member
Joined
Aug 28, 2011
Messages
872
Location
CenTex
looks pretty similar to this3/8" .It's the first and only one I've found in the wild

I've got two ratchets nearly identical to that. One is marked Mopar and the other Dayton. My research showed they were rebranded Bonney. The Mopar has a different shaped handle but the head is the same. The Dayton appears identical (these are 1/2" drive....I also have a 3/8 Mopar that's the same)
 
OP
D

DSLTRK

Well-known member
Joined
Jan 7, 2012
Messages
1,118
Location
PHELAN, CA
Thanks all for responding. The patent date really helped out. I did count the teeth and it indeed is a 90 tooth, and one of the smoothest ratchets I've ever handled.

It is confusing as to why they sealed the head, when I first received mine, it would lock up occasionally(like the craftsman thin profile) if spun quickly but a soak in WD-40 solved the problem.
 

stratman977

Well-known member
Joined
Jan 26, 2012
Messages
633
Location
Belle Vernon, PA
Whats interesting is if you look at that patent the first reference it has is a patent filed in 1907 for a 60 tooth ratchet.

I would guess the recent popularity of fine tooth ratchets comes from improvements in materials and manufacturing to make the small teeth cheaper to make.
 
To avoid these ads, REGISTER NOW!
Top Bottom