The VISES of Garage Journal

PghJKB · Apr 13, 2013

Have been holding out on you guys. This year has proven to be very kind to me vise-wise. Feb, Mar and now April. My haul today was three, two Wiltons and a Rock Island. At least I think there are two Wiltons.

The first Wilton was an Estate Sale purchase, $40.00 - a bit on the high side, but it is the first Wilton on this style that I have run into.

On the way home stopped at the junkyard to drop off some cans. My dog needed to water the plants and the yardmaster showed me where to take Max. While waiting for him I spotted and old jack and went over to check it out. Lo and behold, there was an exposed screw Rock Island in a puddle. Now my nose was on the ground. Routed around a bit and found what I believe is a Wilton in another puddle. Damn, where is the camera when you need it?

Check out the finds. Need to do some research to figure out exactly what I have. The junkyard Wilton will be a real challenge. Nothing moves.

Got lots more images to post including a Wilton "Juno" clamp-on vise.

BlindViper · Apr 13, 2013

My score of the day 55$ for all 8.

ipp · Apr 13, 2013

My Dad's old vice which was my grandpa's vice.

It's a Athol 623 1/2.

<a href="http://www.flickr.com/photos/58705333@N08/8647070994/" title="Untitled by wilkinru, on Flickr"><img src="http://farm9.staticflickr.com/8401/8647070994_32f372e824_z.jpg" width="640" height="480" alt="Untitled"></a>

Mark in Indiana · Apr 13, 2013

BlindViper said:
My score of the day 55$ for all 8.

Nice haul. I originally bought my Morgan 10a to resell but I've found it too useful to let go.

autopts · Apr 13, 2013

Geeze, the vise photos are almost streaming now.
Blane..I'm a big fan of the Naked Look..That one is money in the bank.

Bigcaddy!.. That swivelback is a Wilton collector's dream and your Craftsman is beyond awesome! You certainly have a wonderful collection. You continue to give me vise candy treats almost weekly..I love em!

fullthrottle24 · Apr 13, 2013

Well, maybe my first you ****! CL find for $40.
A Chas Parker 474!

[/URL]][/IMG]

Outlawmws · Apr 13, 2013

I envy you the 474, but you can't self **** on GJ... Sorry..

fullthrottle24 · Apr 14, 2013

Outlawmws said:
I envy you the 474, but you can't self **** on GJ... Sorry..

Sorry about the breach of etiquette. It came from an Alcoa plant in Cleveland.
I am pleased to own it.

Mike

Mr.1961 · Apr 14, 2013

balane said:
Picked this one up last week off of Craig's List. It was covered in about a quarter inch of house paint. The jaws are a little out of line for some reason, the action is super nice on it though. I decided to leave this one unfinished and put a few coats of gloss clear enamel on it.

.

Nice!

bigcaddy said:
I had some time today after work to finally assemble a couple of vises that have been sitting around for some time now.

The first is my Wilton 450SJ. I almost had is complete last weekend but i forgot the replacement screws, collar, jaw inserts and collar screws.

The rear cap was missing so it was replaced with a Ford front wheel hub dust cover. It fits perfectly and almost looks original. If i gave it some more time, it would of been impossible to tell

The paint is boring Machine Grey but that was close to the original color and i think it looks good.

Thanks for the finger savers, Autopts

That thing is a beast! Pretty nice looking too! :thumbup:

Mr.1961 · Apr 14, 2013

gabbyduffy · Apr 14, 2013

I just finished my latest project, its a 100lbs fpu Polish vise with 6" jaws painted with hammerite mid green paint..........enjoy the photos.

gabbyduffy · Apr 14, 2013

a few more photos of the 6" FPU made in Poland vise.......enjoy.

bigcaddy · Apr 14, 2013

Does anybody on here live in Mass or at least near the Cape? I've been checking CL and there are a ton of killer vises on there for great prices.

I've seen a number of Reed, Starretts, Athols, some Prentiss/Monarch and a Wilton 2" Baby Bullet w/ a PowerArm, near mint that sold for 20.00 :shocking:

TreePointer · Apr 14, 2013

Road trip!

HandsomeDan · Apr 14, 2013

bigcaddy said:
Does anybody on here live in Mass or at least near the Cape? I've been checking CL and there are a ton of killer vises on there for great prices.

I've seen a number of Reed, Starretts, Athols, some Prentiss/Monarch and a Wilton 2" Baby Bullet w/ a PowerArm, near mint that sold for 20.00

I know someone that lives on the south coast.
maybe i'll give him a ring.

bigcaddy · Apr 14, 2013

HandsomeDan said:
I know someone that lives on the south coast.
maybe i'll give him a ring.

If there is anything there in June/July, i might have to pick it up myself. :bounce:

There are a ton of old run-down workshops/sheds in the area we stay at on vacation. I'm tempted to ask some people to look around but have no way of packing or shipping large heavy items home.

I do think i'm the only person in the world that actually packs a tape gun in my luggage so i can tape up flat rate boxes and send things to myself in CA :beer:

v8garage · Apr 14, 2013

Dang, Fullthrottle, the Parker wrenches are worth $40.00!
V/8

oldldh · Apr 14, 2013

EBay find...

5' x 13' steel layout table, with a monster Starrett vise attached...

As I am uninformed about things like this, I have no idea what this setup would be worth, but one of you would know...$2,950.00 :shocking:

Saiga · Apr 14, 2013

HandsomeDan · Apr 14, 2013

bigcaddy said:
I do think i'm the only person in the world that actually packs a tape gun in my luggage so i can tape up flat rate boxes and send things to myself in CA

I might start doing this. ha!

oldldh said:
EBay find...

5' x 13' steel layout table, with a monster Starrett vise attached...

As I am uninformed about things like this, I have no idea what this setup would be worth, but one of you would know...$2,950.00

That's a HUGE vise. Maybe that guy will split it from the table for you. Can't hurt to ask!

jabberwoki · Apr 14, 2013

It`s done except for the last pipe vise coming next friday and a little more detail work on the lettering.
The clamp bolts are good for now till i come up with a better set up.

Mr.1961 · Apr 15, 2013

My No.3

fullthrottle24 · Apr 15, 2013

Just finished this fun little project. Found this beat up Wilton Shop King and immediately knew what it need. The vise screams 50's styling. Got it cleaned up and threw some era appropriate paint on it.
Before:

[/URL][/IMG]
After:

[/URL][/IMG]

jabberwoki · Apr 15, 2013

fullthrottle24 said:
Just finished this fun little project. Found this beat up Wilton Shop King and immediately knew what it need. The vise screams 50's styling. Got it cleaned up and threw some era appropriate paint on it.
Before:

[/URL][/IMG]
After:

[/URL][/IMG]

10 out of 10 great color scheme well done very original.

Saiga · Apr 15, 2013

Reed steamfitter vise

ADSR · Apr 15, 2013

fullthrottle24 said:
Just finished this fun little project. Found this beat up Wilton Shop King and immediately knew what it need. The vise screams 50's styling. Got it cleaned up and threw some era appropriate paint on it.
Before:

[/URL][/IMG]
After:

[/URL][/IMG]

Well done, sir! looks amazing!

Fyrme · Apr 15, 2013

fullthrottle24 said:
Just finished this fun little project. Found this beat up Wilton Shop King and immediately knew what it need. The vise screams 50's styling. Got it cleaned up and threw some era appropriate paint on it.
Before:

[/URL][/IMG]
After:

[/URL][/IMG]

Stunning! That said in a completely non homo way. :lol_hitti

. But seriously, that thing is ****. I too have a shop king and will be stealing this scheme if you don't mind.

Chris4x4Gill2 · Apr 15, 2013

I got this out of my grandfathers old shop. I don't have a clue on age. Anyone have a guess?

The Diamond shaped badge on the outer jaw says LITTCO

Says on the side:

Littlestown
HDWE & FDRY CO
Littlestown PA

and with a scale

Fyrme · Apr 15, 2013

Found this one on my local CL. I've never seen one like it. Asking $75. Not sure what I'd do with it but I like it.

Low Friction · Apr 15, 2013

Someone selling a Parker 288-1/2. Looks pretty good except no pipe jaws.

http://seattle.craigslist.org/see/tls/3745254666.html

Mark in Indiana · Apr 15, 2013

fullthrottle24 said:
Just finished this fun little project. Found this beat up Wilton Shop King and immediately knew what it need. The vise screams 50's styling. Got it cleaned up and threw some era appropriate paint on it.
Before:

[/URL][/IMG]
After:

[/URL][/IMG]

Very cool!

TreePointer · Apr 15, 2013

fullthrottle24 said:

Yes, perfect coloring. I think I even see a tail fin, Daddy O!

fullthrottle24 · Apr 15, 2013

Thanks for all the compliments. Feel free to steal away Fyrme. I have learned a ton from everyone here.

Mike

TreePointer · Apr 15, 2013

I haven't run into many decent vises here in a good while. Most are pretty well abused, but I did score a couple this past weekend. These photos were taken just after I got them home (some sawdust and shop grime still on them).

I finally brought home my first Prentiss (354-1/2). Has both pipe jaws and is very toothy.

Athol 624:

Mark in Indiana · Apr 16, 2013

The following Parker 205 lock bolt pictures were requested by PECVD2. I don't know how to attach them to PMs. I've always said that I'm a better mechanic than computer guy. Sorry for any inconvenience.

BTW: if anyone can give me some guidance on attaching pictures on PM's, I would appreciate it.

Mr.1961 · Apr 16, 2013

north · Apr 16, 2013

fullthrottle24 said:
Just finished this fun little project. Found this beat up Wilton Shop King and immediately knew what it need. The vise screams 50's styling. Got it cleaned up and threw some era appropriate paint on it.
*snip*

Absolutely beautiful!

Mr.1961 · Apr 17, 2013

Anyone have a pair of Wilton 3/8-16 hexagonal old school t-handles? I'm looking to buy a pair. Steel or brass is fine.

1973 · Apr 17, 2013

Mr. 1961 very cool collection, I love the patena!

Mr.1961 · Apr 17, 2013

1973 said:
Mr. 1961 very cool collection, I love the patena!

Thank you! I use the No.4 everyday!

The VISES of Garage Journal

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Member

Member

Active member

Attachments

Active member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Attachments

Member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Attachments

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Member

Well-known member

Member

Active member

Member