Hey, I have some Craftsman tools for sale. I have this 43 piece wrench set brand new in box, this 46 piece 1/2" socket set new in box and some miscellaneous sockets. The sockets are all new, some are just beat up from the factory.
Socket set: $130+shipping
Wrench set: Sold!
Sockets: $30+shipping for everything
Prices negotiable
I was planning on shipping the wrenches in the box they came in (they were all just put in a small box) in another box and throwing the sockets in a bag. If you want me to ship them in some other fashion let me know.
I'm gonna list all the socket details but would prefer to just sell them as one chunk. I have all the details for these if you want them but it will take me forever to write them all up so I just did part numbers
Ratchet Size/ Points / Size / Standard|Deep
34054 - 1/2 6pt 1" S - has some overspray (should be able to scrape it off)
45892 - 1/2 6pt 15/16" S - awful plating (it's all peeling)
45891 - 1/2 6pt 7/8" S - has some small rust spots
50733 - 1/2 6pt 1-1/8" S - minor plating issues
50732 - 1/2 6pt 1-1/16" S - ok
50734 - 1/2 6pt 1-3/16" S - ok
50735 - 1/2 6pt 1-1/4" S - ok
45936 - 1/2 6pt 13/16" D - ok. I have 2 of these
45897 - 1/2 6pt 13mm S - ok (engraving overlaps a bit)
44228 - 1/2 6pt 18mm S - ok
50744 - 1/2 6pt 24mm D - ok
45828 - 3/8 6pt 11/16 S - ok
34593 - 1/4 6pt 9/32 S - won't latch on socket (I have 2 of these...both won't latch)
50768 - 1/2 12pt 1-1/8 D - ok
50773 - 1/2 12pt 22mm D - inside plating bad
50749 - 1/2 12pt 1-1/2 D - ok
Sold! 50752 - 1/2 12pt 36mm S - ok
45905 - 1/2 12pt 1-1/4 S - ok
50748 - 1/2 12pt 1-3/16 S - ok
34058 - 1/2 12pt 1-1/16 S - ok
34582 - 1/2 12pt 7/16 D - minor machining scratches
34064 - 1/2 12pt 12mm S - label has some minor machining scratches
45806 - 1/4 12pt 1/4 S - seats loose
43599 - 1/4 12pt 9/16 D -ok
45901 - 3/8 12pt 5/16 S - ok
34641 - 3/8 12pt 10mm S - ok (the 2 types of engraving overlap)
34651 - 3/8 12pt 12mm S - ok (I have 2 of these)
50678 - 3/8 12pt 22mm S - ok
50739 - 1/2 8pt 7/16 S - ok
43538 - 1/4" 1 in extension - it will seat on a socket but I can't get a socket to seat on it
43539 - 1/3 2.5 or 3 inch extension. Minor issues with plating on top and bottom
The sockets from back to front, left to right are in the same order as the list above
Socket set: $130+shipping
Wrench set: Sold!
Sockets: $30+shipping for everything
Prices negotiable
I was planning on shipping the wrenches in the box they came in (they were all just put in a small box) in another box and throwing the sockets in a bag. If you want me to ship them in some other fashion let me know.
I'm gonna list all the socket details but would prefer to just sell them as one chunk. I have all the details for these if you want them but it will take me forever to write them all up so I just did part numbers
Ratchet Size/ Points / Size / Standard|Deep
34054 - 1/2 6pt 1" S - has some overspray (should be able to scrape it off)
45892 - 1/2 6pt 15/16" S - awful plating (it's all peeling)
45891 - 1/2 6pt 7/8" S - has some small rust spots
50733 - 1/2 6pt 1-1/8" S - minor plating issues
50732 - 1/2 6pt 1-1/16" S - ok
50734 - 1/2 6pt 1-3/16" S - ok
50735 - 1/2 6pt 1-1/4" S - ok
45936 - 1/2 6pt 13/16" D - ok. I have 2 of these
45897 - 1/2 6pt 13mm S - ok (engraving overlaps a bit)
44228 - 1/2 6pt 18mm S - ok
50744 - 1/2 6pt 24mm D - ok
45828 - 3/8 6pt 11/16 S - ok
34593 - 1/4 6pt 9/32 S - won't latch on socket (I have 2 of these...both won't latch)
50768 - 1/2 12pt 1-1/8 D - ok
50773 - 1/2 12pt 22mm D - inside plating bad
50749 - 1/2 12pt 1-1/2 D - ok
Sold! 50752 - 1/2 12pt 36mm S - ok
45905 - 1/2 12pt 1-1/4 S - ok
50748 - 1/2 12pt 1-3/16 S - ok
34058 - 1/2 12pt 1-1/16 S - ok
34582 - 1/2 12pt 7/16 D - minor machining scratches
34064 - 1/2 12pt 12mm S - label has some minor machining scratches
45806 - 1/4 12pt 1/4 S - seats loose
43599 - 1/4 12pt 9/16 D -ok
45901 - 3/8 12pt 5/16 S - ok
34641 - 3/8 12pt 10mm S - ok (the 2 types of engraving overlap)
34651 - 3/8 12pt 12mm S - ok (I have 2 of these)
50678 - 3/8 12pt 22mm S - ok
50739 - 1/2 8pt 7/16 S - ok
43538 - 1/4" 1 in extension - it will seat on a socket but I can't get a socket to seat on it
43539 - 1/3 2.5 or 3 inch extension. Minor issues with plating on top and bottom
The sockets from back to front, left to right are in the same order as the list above
Last edited: